Design Master Electrical allows you to insert panel schedules on the drawing and automatically update them as your design changes. These schedules do not have to be on the same drawing as your devices.
Open drawing "E0.dwg" in your tutorial folder. To insert the panel schedule on this drawing, go to
DM Electrical 
One Line Device Schedules Insert One Line Device Schedule
The Insert Panel Schedule dialog box will open as shown below.
Make certain panel H1 is selected as shown above and press OK. Design Master Electrical will take you to the drawing and will prompt you to indicate the insertion point for panel H1. Click to place the upper left-hand corner of panel schedule H1. Once schedule H1 has been placed, Design Master Electrical will prompt you to indicate the insertion point for panel L1. You may click below schedule H1 to place the upper left-hand corner of panel schedule L1. Once you have placed H1 and L1, the command is complete. Your drawing should look like the one below.
Congratulations! You now know how to perform the basic panel and transformer functions in Design Master Electrical.
See Light Fixtures for the next tutorial.