After devices have been placed on a circuit, Design Master can locate the circuits on the drawing for the user.
To find circuits, go to
DM Electrical
Circuiting and HomerunsCircuiting
The Circuiting dialog box will appear.
Choose the correct panel from the pull-down list next to the One Line Device field, then select the particular circuit you wish to locate on the drawing.
Press the Find Circuit button in the upper right-hand corner.
If the circuit is on the current drawing, Design Master will do the following:
| • | Highlight the circuited devices |
| • | Zoom to the devices |
If the circuit is not on the current drawing, you will see the following Design Master Electrical message.
To remove the dashed highlights from the circuited devices, use the AutoCAD Regen command.