Select Loop Center Point

To draw a homerun with all loops arcing outward from a single point, go to

DM ElectricalCircuiting and HomerunsSet Looping Options

The Looping Options dialog box will appear.

Set the Select Loop Center Point option to Yes, then press OK.

You may now have Design Master draw a homerun in the usual way, with the following addition. Once you have selected the device to draw the homerun and the devices to loop, Design Master will prompt the user to indicate the arc center point. Click to select the center point and press the ENTER key when you have finished selecting the center point. Design Master will draw the loops to arc away from the chosen center point.

This command only affects the use of the Draw Homeruns and Loops command; it does not affect the Draw Homerun Only command.