This command causes Design Master to draw multiple homeruns on a drawing at one time. This function does not combine homeruns or allow the user to choose on which device to place the homerun.
DM Electrical
Circuiting and HomerunsAutomatic Homerun
Draw a crossing window around the devices to homerun, making sure to include all circuits you want to homerun inside this window.
At the AutoCAD command line, Design Master will ask the user to select an angle for the homeruns' insertion. You may press the space bar without specifying an angle to insert arrows pointing towards the panel graphics on the drawing. Or, you may click twice anywhere on the drawing to indicate an angle for the homeruns and then press space bar.
After pressing the space bar, the command will be complete. Your drawing will look something like the drawing below.
