Design Master can create schedules for panels, switchboards, motor control centers, wireways, and bus gutters. To place a schedule on a drawing, go to
DM Electrical
One Line SchedulesInsert One Line Device Schedule
The Insert One Line Device Schedule dialog box will appear as shown below.
Select the schedule to insert and press OK.
Select an open space on the drawing to insert the one line device schedule. The cross-hairs will place the top left-hand corner of the schedule on the drawing.
Design Master will allow the user to insert the next one line device in the database without selecting Insert One Line Device Schedule again. To insert a schedule of the next description as was seen in the Insert Panel Schedule dialog box, move away from the first one line device schedule and click again. You may continue doing this until you have inserted all the schedules you wish. When you wish to end the command, press enter.
The schedules are inserted into the drawing with no values (see above example). To fill in the schedule, see the Update One Line Device Schedule command.