As Design Master does not automatically update the one line device schedules when changes are made that effect them, you must manually update the schedules before plotting them to ensure they reflect the most recent changes.
To update a one line device schedule, go to
DM Electrical
One Line SchedulesUpdate One Line Device Schedule
Design Master will ask you to select objects. Here, you must tell the program which schedules you wish to update. Click on all the schedules that need to be updates and press enter.
You will be asked if you want to recalculate the load between one line devices, go to
Choosing Yes will guarantee that you have the latest information. If you have just recalculated the loads between one line devices and have not done any more work on the project, you may press No and skip the calculation. It will save a little time.
Design Master will update all the circuit loads, the one line device loads at the bottom of the schedules, and the one line device information at the top of the schedules. You will see the below one line device schedule, as opposed to the schedule as it was inserted (see Insert One Line Device Schedule). The command is complete.
