Copy and Increment Circuits

The Copy and Increment Circuits command allows you to copy a device that is circuited and have the copied device also be circuited.

To copy a device in this manner, go to

Ribbon: DM Electrical->Devices-> dm_elec-device-copyAndIncrement Copy and Increment Circuits

Pulldown Menu: DM Electrical->Modify Devices->Copy and Increment Circuits

You will be prompted to select the devices to be copied.

Select objects:

Select the devices to be copied and then specify where the new devices are to be located. The Increment Circuits dialog box will appear.

Increment Circuits Dialog Box


The Increment Circuits dialog box is broken into two sections, one to the left of the arrow and one to the right.

The left section lists the information about the circuits that the devices you are copying are connected to. Each circuit being copied is listed. The associated Panel, Breaker, Load, and Description for the circuit are displayed.

The right section lists the circuit that the copied devices will be connected to. You can change the Panel, Circuit, and Description columns.

Page url:
©2012-2018 Design Master Software, Inc