Edit Bus Gutter/Duct List

To edit bus gutter/duct list project settings, go to

Ribbon: DME: Customization->Project Customization-> dm_elec-old-busgutter-labelP Bus Gutter/Bus Duct List Label Group

Pulldown Menu: DM Electrical->Customization->Labels and Schedules->Project List->Edit Bus Gutter/Duct List

To edit bus gutter/duct list master settings, go to

Ribbon: DME: Customization->Master & Standards Customization-> dm_elec-old-panel-labelM Edit Distribution Equipment Master Groups

Pulldown Menu: DM Electrical->Customization->Labels and Schedules->Standards and Master Lists->Edit Distribution Equipment Master Groups

Bus Gutter List Label Display and Order Dialog Box

customization--bus-gutter-list-label-display-and-order-dialog-box

See the Common Label and Schedule Information section for more information on using the Move Up and Move Down buttons and the Key, Label, Width, Display, and Schedule Title fields.

Values in the Key column are listed alphabetically below.

AIC: This value is taken from the bus gutter definition.

Bus Amps: This value is taken from the bus gutter definition.

Callout: The name of the bus gutter.

Fault: The total fault in amps of the bus gutter.

Feeder Size: This value is taken from the bus gutter definition.

List Note 1: This value is taken from the bus gutter definition.

List Note 2: This value is taken from the bus gutter definition.

List Note 3: This value is taken from the bus gutter definition.

Location: This value is taken from the bus gutter definition.

Mounting: This value is taken from the bus gutter definition.

Note 1: This value is taken from the bus gutter definition.

Note 2: This value is taken from the bus gutter definition.

Number of Taps: This value is taken from the bus gutter definition.

Short Voltage: The voltage value and poles of the bus gutter.

Examples: 208Y/120V 1P, 208V 2P

Total Calculated Amps: The total calculated load in amps of the bus gutter.

Total Calculated KVA: The total calculated load in kVA of the bus gutter.

Total Connected Amps: The total connected load in amps of the bus gutter.

Total Connected KVA: The total connected load in kVA of the bus gutter.

Upstream Breaker and Poles: The size of the breaker and number of poles for the bus gutter feeder.

Examples: 20/1, 30/3

Upstream Circuit: The circuit the bus gutter is fed from.

Upstream Device: The device the bus gutter is fed from.

Upstream OCP: This value is taken from the bus gutter definition.

Utility Fault: The fault in amps at the bus gutter.

Volts: The full voltage value of the bus gutter. The volts, poles, and wires will be displayed.

Examples: 208Y/120V 1P 2W, 208V 2P 2W

Volts Only: The voltage value of the bus gutter. Only the volts will be displayed. The poles and wires will not be displayed.

Examples: 208Y/120V, 208V


Page url: http://www.designmaster.biz/docs/elec/index.html?edit_bus_gutter_duct_list.htm
©2012-2018 Design Master Software, Inc