Edit Generator List

To edit generator list project settings, go to

Ribbon: DME: Customization->Project Customization-> dm_elec-old-generator-labelP Generator List Label Group

Pulldown Menu: DM Electrical->Customization->Labels and Schedules->Project List->Edit Generator List

To edit generator list master settings, go to

Ribbon: DME: Customization->Master & Standards Customization-> dm_elec-old-panel-labelM Edit Distribution Equipment Master Groups

Pulldown Menu: DM Electrical->Customization->Labels and Schedules->Standards and Master Lists->Edit Distribution Equipment Master Groups

Generator List Label Display and Order Dialog Box

customization--generator-list-label-display-and-order-dialog-box

See the Common Label and Schedule Information section for more information on using the Move Up and Move Down buttons and the Key, Label, Width, Display, and Schedule Title fields.

Values in the Key column are listed alphabetically below.

Callout: The name of the generator.

Fault: The total fault in amps of the generator.

Feeder Size: This value is taken from the generator definition.

KVA: This value is taken from the generator definition.

KW: This value is taken from the generator definition.

List Note 1: This value is taken from the generator definition.

List Note 2: This value is taken from the generator definition.

List Note 3: This value is taken from the generator definition.

Location: This value is taken from the generator definition.

Note 1: This value is taken from the generator definition.

Note 2: This value is taken from the generator definition.

Number of Taps: This value is taken from the generator definition.

Power Factor: This value is taken from the generator definition.

Short Voltage: The voltage value and poles of the generator.

Examples: 208Y/120V 1P, 208V 2P

Total Calculated Amps: The total calculated load in amps of the generator.

Total Calculated KVA: The total calculated load in kVA of the generator.

Total Connected Amps: The total connected load in amps of the generator.

Total Connected KVA: The total connected load in kVA of the generator.

Upstream OCP: This value is taken from the generator definition.

Utility Fault: The fault in amps at the generator.

Volts: The full voltage value of the generator. The volts, poles, and wires will be displayed.

Examples: 208Y/120V 1P 2W, 208V 2P 2W

Volts Only: The voltage value of the generator. Only the volts will be displayed. The poles and wires will not be displayed.

Examples: 208Y/120V, 208V


Page url: http://www.designmaster.biz/docs/elec/index.html?edit_generator_list.htm
©2012-2018 Design Master Software, Inc