Edit Low Voltage Panel List

To edit the low voltage panel list settings, go to

DM Electrical->Customization->Labels and Schedules->Project List->Edit Low Voltage Panel List

or

DM Electrical->Customization->Labels and Schedules->Standards and Master Lists->Edit Low Voltage Panel List

Select Low Voltage Device Group Dialog Box

Customization--Labels and Schedules.Select Low Voltage Device Group dialog box

Select the low voltage device group to be edited and press OK.The group's Panel List Label Display and Order dialog box will appear as shown in the following example.

Customization--Labels and Schedules.Fire Alarm Panel List Label Display and Order dialog box

See the Common Label and Schedule Information section for more information on using the Move Up and Move Down buttons and the Key, Label, Width, Display, and Schedule Title fields.

Callout: The name of the low voltage panel.

Feeder Size: This value is taken from the low voltage panel definition.

Group: This value is taken from the low voltage panel definition.

Location: This value is taken from the low voltage panel definition.

Mounting: This value is taken from the low voltage panel definition.

Note 1: This value is taken from the low voltage panel definition.

Note 2: This value is taken from the low voltage panel definition.

Number of Taps: This value is taken from the low voltage panel definition.

Total Calculated Amps: The total calculated load in amps of the low voltage panel.

Total Calculated KVA: The total calculated load in kVA of the low voltage panel.

Total Connected Amps: The total connected load in amps of the low voltage panel.

Total Connected KVA: The total connected load in kVA of the low voltage panel.


Page url: http://www.designmaster.biz/docs/elec/index.html?edit_low_voltage_panel_list.htm
©2012 Design Master Software, Inc