Edit Multiple Receptacles

To edit multiple receptacles, go to

DM Electrical->Receptacles->Edit Multiple Receptacles.

You will be prompted to select the receptacles that you want to edit.

Select receptacles to edit:
Select objects:

After you have selected the receptacles to edit, the Edit Multiple Receptacles dialog box will open.

Edit Multiple Receptacles Dialog Box

Receptacles--Edit Multiple Receptacles Dialog Box

Changes can be made to the receptacles in the same way as when they were inserted. See the Insert Receptacles section for more information.

To change a value in the selected receptacles, check the box next to the field. Any fields you do not check will not be changed.

After the box next to a field is checked, it will be enabled and allow you to make changes to it.

Some fields have a second check box. This check box specifies whether the value should override the value in the schedule. If it is left blank, the receptacle will be reset to the default value from the schedule.

edit_multiple_first_check

If the box is checked, then the value for the specific receptacle will replace the value from the schedule.

edit_multiple_second_check

Press OK to apply the changes to the selected receptacles.


Page url: http://www.designmaster.biz/docs/elec/index.html?edit_multiple_receptacles.htm
©2012 Design Master Software, Inc