Edit Voltage Drop Schedule List

To edit the voltage drop schedule settings, go to

DM Electrical->Customization->Labels and Schedules->Project List->Edit Voltage Drop Schedule List

or

DM Electrical->Customization->Labels and Schedules->Standards and Master Lists->Edit Voltage Drop Schedule List

Voltage Drop Schedule Label Display and Order Dialog Box

Customization--Labels and Schedules.Voltage Drop Schedule Label Display and Order dialog box

See the Common Label and Schedule Information section for more information on using the Move Up and Move Down buttons and the Key, Label, Width, Display, and Schedule Title fields.

Branch Circuit Wire Size: The size of the phase conductors on the branch circuit.

Device: The one-line device that the row displays fault information about. Devices are listed in the order they are connected, starting at the utility. Devices that are connected to other devices are indented to indicate their relationship. If the names of the devices extend beyond the edge of the column because of the indentation, increase the width of the column.

Feeder Length: The length of the feeder to the one-line device.

Feeder Voltage Drop: The voltage drop on the feeder from the utility to one-line device.

Feeder Wire Size: The size of the phase conductors on the feeder to the one-line device.

Maximum Branch Circuit Voltage Drop: The highest voltage drop on all of the branch circuits on the one-line device.

Total Voltage Drop: The feeder voltage drop plus the maximum branch circuit voltage drop.


Page url: http://www.designmaster.biz/docs/elec/index.html?edit_voltage_drop_schedule_list.htm
©2012 Design Master Software, Inc