Edit Wireway List

To edit wireway list project settings, go to

Ribbon: DME: Customization->Project Customization-> dm_elec-old-wireway-labelP Wireway List Label Group

Pulldown Menu: DM Electrical->Customization->Labels and Schedules->Project List->Edit Wireway List

To edit wireway list master settings, go to

Ribbon: DME: Customization->Master & Standards Customization-> dm_elec-old-panel-labelM Edit Distribution Equipment Master Groups

Pulldown Menu: DM Electrical->Customization->Labels and Schedules->Standards and Master Lists->Edit Distribution Equipment Master Groups

Wireway List Label Display and Order Dialog Box

customization--wireway-list-label-display-and-order-dialog-box

See the Common Label and Schedule Information section for more information on using the Move Up and Move Down buttons and the Key, Label, Width, Display, and Schedule Title fields.

Values in the Key column are listed alphabetically below.

AIC: This value is taken from the wireway definition.

Callout: The name of the wireway.

Fault: The total fault in amps of the wireway.

Feeder Size: This value is taken from the wireway definition.

List Note 1: This value is taken from the wireway definition.

List Note 2: This value is taken from the wireway definition.

List Note 3: This value is taken from the wireway definition.

Location: This value is taken from the wireway definition.

Mounting: This value is taken from the wireway definition.

Note 1: This value is taken from the wireway definition.

Note 2: This value is taken from the wireway definition.

Number of Taps: This value is taken from the wireway definition.

Short Voltage: The voltage value and poles of the wireway.

Examples: 208Y/120V 1P, 208V 2P

Total Calculated Amps: The total calculated load in amps of the wireway.

Total Calculated KVA: The total calculated load in kVA of the wireway.

Total Connected Amps: The total connected load in amps of the wireway.

Total Connected KVA: The total connected load in kVA of the wireway.

Upstream Breaker and Poles: The size of the breaker and number of poles for the wireway feeder.

Examples: 20/1, 30/3

Upstream Circuit: The circuit the wireway is fed from.

Upstream Device: The device the wireway is fed from.

Upstream OCP: This value is taken from the wireway definition.

Utility Fault: The fault in amps at the wireway.

Volts: The full voltage value of the wireway. The volts, poles, and wires will be displayed.

Examples: 208Y/120V 1P 2W, 208V 2P 2W

Volts Only: The voltage value of the wireway. Only the volts will be displayed. The poles and wires will not be displayed.

Examples: 208Y/120V, 208V


Page url: http://www.designmaster.biz/docs/elec/index.html?edit_wireway_list.htm
©2012-2018 Design Master Software, Inc