Insert Low Voltage Device Project Schedule
|Up Previous Next|
A low voltage device schedule that lists all the low voltage devices used in the current project can be inserted on the drawing.
To insert this schedule into the drawing, go to
DM Electrical->Low Voltage Devices->Insert Low Voltage Device Project Schedule
Select Low Voltage Device Group Dialog Box
Select the low voltage device group to be listed on the schedule and press OK. The Insert Low Voltage Device Project Schedule dialog box will appear.
Schedule Notes: A note that will appear below the schedule when inserted on the drawing.
Maximum Schedule Height: Whether or not the schedule has a maximum height. This height is inches on the printed page.
If this is not checked, the schedule will be in a single schedule.
If this is checked, you can specify the maximum height of the schedule. When the schedule exceeds this height, it will be continued in a second schedule next to the first. The label of the second schedule will have the Schedule Title Continued Label option added to it to indicate that it is a continuation of the first schedule. See the section for more information.
Specify on Drawing: Press this button to specify the Maximum Schedule Height on the drawing. The dialog box will be closed and you will be prompted to specify the height.
Specify maximum schedule height:
The distance that you enter on the drawing will be used as the maximum height. It is simplest to draw a line straight down to where the bottom of the schedule should be located.
Zoom to Schedule After Insertion: If this box is checked, the display will be moved to the schedule location after it has been inserted or updated. Check this box if you are having difficulty locating your schedule on a busy drawing.
Show Unused Low Voltage Devices: Whether or not low voltage devices in the schedule that have not been inserted on a drawing will be displayed in the schedule.
Edit Title, Column Labels, and Column Order: Use this button to modify the layout of the low voltage device schedule on the drawing. See the section for more information.
Show Subscript on Symbols: Check this box to display the subscript note in the symbol column of the schedule. The subscript note is defined in the project schedule.
If this box is not checked, the symbol column will display the low voltage device symbol without the subscript note.
Inserting or Updating the Schedule on the Drawing
To insert or update the schedule, press OK.
Inserting the Schedule for the First Time
If the low voltage device Schedule is not currently inserted on the drawing, you will be prompted for the insertion location of the schedule.
Specify insertion point for <low voltage device> schedule:
The location you specify will be used as the top-left corner for the low voltage device schedule.
Updating the Schedule Already on the Drawing
If the low voltage device schedule is already inserted on the drawing, it will be updated in its current location.
It is necessary to update the schedule on the drawing when you make changes to the project schedule. The schedule will not update automatically.
The low voltage device schedule will also be updated when thecommand is run.
If you have manually inserted graphics, such as revision clouds, over the schedule graphic, always be certain to check their location after updating the schedule.
©2012 Design Master Software, Inc