Insert Low Voltage Panel List
|Up Previous Next|
To insert a list of low voltage panels in the database on the drawing, go to
DM Electrical->One-Line Devices->Insert Low Voltage Panel List
You will be prompted to select which the low voltage device group to which the panel list belongs in the Select Low Voltage Device Group dialog box.
Select Low Voltage Device Group Dialog Box
After you have selected the low voltage device group, the Insert Low Voltage Panel List dialog box will open.
Insert Low Voltage Panel List Dialog Box
Schedule Notes: A note that will appear below the schedule when inserted on the drawing.
Maximum Schedule Height: Whether or not the schedule has a maximum height. This height is inches on the printed page.
If this is not checked, the schedule will be in a single schedule.
If this is checked, you can specify the maximum height of the schedule. When the schedule exceeds this height, it will be continued in a second schedule next to the first. The label of the second schedule will have the Schedule Title Continued Label option added to it to indicate that it is a continuation of the first schedule. See the section for more information.
Specify on Drawing: Press this button to specify the Maximum Schedule Height on the drawing. The dialog box will be closed and you will be prompted to specify the height.
Specify maximum schedule height:
The distance that you enter on the drawing will be used as the maximum height. It is simplest to draw a line straight down to where the bottom of the schedule should be located.
Zoom to Schedule After Insertion: If this box is checked, the display will be moved to the schedule location after it has been inserted or updated. Check this box if you are having difficulty locating your schedule on a busy drawing.
Edit Title, Column Labels, and Column Order: Press this button to modify the layout of the schedule on the drawing. See the section for more information.
Inserting or Updating the Schedule on the Drawing
To insert or update the schedule, press OK.
Inserting the Schedule the First Time
If the low voltage panel schedule is not currently inserted on the drawing, you will be prompted for the insertion location of the schedule.
Specify insertion point for the low voltage panel schedule:
The location you specify will be used as the top-left corner for the low voltage panel schedule.
Updating the Schedule Already on the Drawing
If the low voltage panel schedule is already inserted on the drawing, it will be updated in its current location.
It is necessary to update the schedule on the drawing when you make changes to the project schedule. The schedule will not update automatically.
The low voltage panel schedule will also be updated when thecommand is run.
If you have manually inserted graphics, such as revision clouds, over the schedule graphic, always be certain to check their location after updating the schedule.
©2012 Design Master Software, Inc