Insert Wall Point

To add a point to a room outline, go to

Ribbon: DM Electrical->Buildings and Rooms-> dm_elec-wallInsertNode Insert Wall Point

Pulldown Menu: DM Electrical->Building Definition->Insert Wall Point

You will be prompted to locate a point either inside or outside of the wall onto which a point is to be inserted.

First fence point crossing wall:

Specify a point on the drawing. You will then be prompted to provide a point on the opposite side of the wall. The line between the two points should cross the wall where you want the new point to be inserted.

Second fence point:

Specify a second point on the drawing. A new point will be inserted on the room outline. The appearance of the outline will not change, but you will have two new grips that you can use to drag the outline into the correct shape.

Page url:
©2012-2018 Design Master Software, Inc