Rotate Alignment Point

The Rotate Alignment Point command can be used to rotate an alignment point on the drawing. You can also use standard AutoCAD commands to rotate the alignment point.

To rotate an alignment point, go to

Ribbon: DM Electrical->Alignment Points-> dm_dm-apoint-rotate Rotate Alignment Point

Pulldown Menu: DM Electrical->Alignment Points->Rotate Alignment Point

If there is only one alignment point on the drawing, you will be prompted for the new rotation angle.

If there is more than one alignment point on the drawing, you will be prompted to indicate which alignment point you want to rotate.

Specify point in area to rotate alignment point in:

Select a point inside the alignment point area that corresponds to the alignment point you want to rotate.

You will then be prompted to indicate the new rotation for the alignment point.

Specify rotation angle or [Copy/Reference] <0>:

After the alignment point is rotated, the location of all of the devices in the database will be updated to reflect the new rotation angle.


Page url: http://www.designmaster.biz/docs/elec/index.html?rotate_alignment_point.htm
©2012-2018 Design Master Software, Inc