Straighten Previous Conduit or Cable Tray

The Straighten Previous Conduit or Cable Tray command is used to make conduit or cable tray centerlines straight relative to the other centerlines they are connected to. The centerline you select will be treated as straight by the command. All the centerlines that point to the selected centerline will be moved so that they are either parallel or perpendicular to the selected centerline.

Any centerlines connected to the centerlines that are moved will have their ending points moved to stay connected. Their starting points will not be moved, which can result in centerlines that are no longer straight. Continue using the Straighten Previous Conduit or Cable Tray command until all the centerlines are straight.

To straighten conduits or cable trays, go to

DM Electrical->3D-BIM->Straighten Previous Conduit or Cable Tray

You will be prompted to select the conduit or cable tray centerline that is straight.

Select the conduit or cable tray that is currently straight:

The centerlines that point to the selected centerline will be made straight.


Page url: http://www.designmaster.biz/docs/elec/index.html?straighten_previous_conduit_or_cable_tray.htm
©2012 Design Master Software, Inc