Update Distribution Equipment Schedule
|Up Previous Next|
Design Master Electrical does not automatically update the distribution equipment schedules when changes are made to the drawing. You must manually update the schedules before plotting to ensure the schedules reflect the most recent changes. To update a distribution equipment schedule, go to
Ribbon: DM Electrical->Distribution Equipment-> Update Distribution Equipment Schedule
Pulldown Menu: DM Electrical->Distribution Equipment Schedules->Update Distribution Equipment Schedule
You will be prompted to identify which schedules are to be updated.
Select distribution equipment schedules to update:
Select all of the schedules that need to be updated and press ENTER.
The dialog box below will appear, asking "Recalculate loads between distribution equipment?"
Yes: All of the values on the distribution equipment schedules will be recalculated. You are guaranteed to have the latest information in your schedules. All of the load totals for the equipment, including loads transferred from distribution equipment connected to it, are recalculated.
No: The values from the most recent calculation will be used. This selection allows you to save time if you know that you recently ran these calculations and have not made any changes that might affect them.
After you answer the prompt on the dialog box, all of the distribution equipment schedules you selected will be updated.
©2012-2018 Design Master Software, Inc