|Up Previous Next|
Allows you to add a graphic to a feeder segment, or modify the graphic for an equipment or feeder segment already inserted on the one-line diagram.
You will be prompted to specify an equipment or feeder.
Select one-line diagram item to change graphic of:
Modifying an Equipment Graphic
Specify an equipment to open the Modify Graphic dialog box:
Equipment Type: The type of equipment graphic to be used. The default types available are described below and can be modified in the command.
One-Line Diagram Graphic: The graphic family that will be used for the equipment.
One-Line Diagram Type: The graphic type that will be used for the equipment. The values in this list are based upon the selected One-Line Diagram Graphic.
Press the OK button to change the equipment graphic on the one-line diagram.
You will be asked whether to update the labels for the equipment:
Update labels: The labels will update to the default location and tags for the equipment graphic.
Leave labels as they are: The location and tags will not be updated. The information for the existing tags will be updated.
Adding or Modifying a Feeder Graphic
If you specify a feeder segment that already has a graphic, you will be asked whether to replace the existing graphic, add an additional graphic, or cancel the command:
The Select OCP Graphic dialog box, Select ID Graphic dialog box, or Select Feeder Graphic dialog box will open, based upon your selections:
Select OCP / ID / Feeder Graphic Dialog Box
©2013-2021 Design Master Software, Inc