Branch circuit device: Other

These values are displayed when the Device Type is set to Branch circuit device: Other.

Family Edit Dialog Box

family-edit-branch-circuit-device-other-dialog-box

Family Settings

The settings for the family. The values set in this section are used unless they are overridden by settings in the bottom Type Settings section.

Device Type: The type of electrical device. Each type has different values that can be set. Displayed here are the settings for Branch circuit device: Other.

Circuit Description: The description that will be displayed on circuits to which this device is connected.

Load: The load defined on the connectors in the family. This value is read-only and cannot be changed in this dialog box. Modify the values in the connectors to change this value.

Isolated Ground: Whether the branch circuit needs an isolated ground wire. If set to Yes, an isolated ground wire is included in the wire callout for the branch circuit connected to this device.

OCP Graphic: The graphic family used for the upstream OCP when the device is inserted on the one-line diagram. The values in this list are based upon the One-Line Diagram Feeder Graphics command.

Use upstream distribution equipment graphic: The Default Downstream OCP Graphic and Default Downstream OCP Type set in the upstream distribution equipment will be used.

OCP Type: The graphic type used for the upstream OCP. The values in this list are based upon the selected OCP Graphic.

Feeder ID Graphic: The graphic family used for the feeder ID when the device is inserted on the one-line diagram. The values in this list are based upon the One-Line Diagram Feeder Graphics command.

Default feeder group: The feeder ID graphic set for the group in the Project Feeder ID Schedule will be used.

Feeder ID Type: The graphic type used for the feeder ID. The values in this list are based upon the selected Feeder ID Graphic.

Type Settings

The settings for specific types in the family. Values set here override the values set in the Family Settings section.

Circuit Description: The circuit description for this family type.

Same as Family Settings: Use the circuit description set in the Family Settings section.
Set in Type Settings: Enter a circuit description in the field provided.

Page url: http://www.designmaster.biz/docs/elecrt/2.0/index.html?edit_family_other_branch_circuit_device.htm
©2013-2021 Design Master Software, Inc