Feeder Phase

Allows you to modify the feeder segment family and type for a feeder on the one-line diagram. You can use this command to change the line type for every segment of a feeder.

You will be prompted to specify a feeder segment.

Select segment on feeder to change:

Opens the Feeder Phase dialog box:

Feeder Phase Dialog Box


Segment Type: The graphic type that will be used for the feeder.

Press the OK button. The graphic types for each segment on the specified feeder will be updated.

Page url: http://www.designmaster.biz/docs/elecrt/2.0/index.html?feeder_phase.htm
©2013-2022 Design Master Software, Inc