This section describes the options available in the One-Line Diagram group in the Options dialog box:
Feeder offset multiplier: The distance between feeders inserted using the Insert and Create, Copy and Create, Power, and Insert and Link commands.
Default feeder segment graphic: The graphic family used by feeder segments that do not have additional graphics. The values in this list are based upon the One-Line Diagram Feeder Graphics command.
Default feeder segment type: The graphic type used for the selected Default feeder segment graphic.
Default panel OCP graphic: The graphic family used by panels for the OCP on downstream feeders inserted using the Insert and Create, Copy and Create, Power, and Insert and Link commands. The values in this list are based upon the One-Line Diagram Feeder Graphics command.
Default panel OCP type: The graphic type used for the selected Default panel OCP graphic.
Default transformer OCP graphic: The graphic family used by transformers for the OCP on downstream feeders inserted using the Insert and Create, Copy and Create, Power, and Insert and Link commands. The values in this list are based upon the One-Line Diagram Feeder Graphics command.
Default transformer OCP type: The graphic type used for the selected Default transformer OCP graphic.
Default drafting view: The drafting view onto which device graphics will be inserted when using the Insert and Link command.
| • | None: You will be prompted to select a drafting view each time. |
| • | Specific drafting view: The device graphic will be added to the drafting view chosen from the list. The values in this list are based upon the drafting views in the project. |