Panel Shared Parameters

DMEN_Panel_LineToLineVoltage: The line-to-line voltage of the distribution equipment as an electrical potential parameter.

DMEN_Panel_LineToNeutralVoltage: The line-to-neutral voltage of the distribution equipment as an electrical potential parameter.

DMEN_Panel_MainDisconnectFrameSize: The frame size of the main disconnect as a current parameter.

DMEN_Panel_MainDisconnectPoles: The number of poles of the main disconnect as an integer parameter.

DMEN_Panel_MainDisconnectTripSize: The trip size of the main disconnect as a current parameter.

DMEN_Panel_MainDisconnectType: The type of main disconnect as an integer parameter.

•	0: The main disconnect is main lugs only.

•	1: The main disconnect is a main circuit breaker.

•	2: The main disconnect is a fused switch.

DMET_Panel_Distribution_System: The distribution system of the distribution equipment. The built-in Revit Distribution System property cannot be included in schedules. Use this parameter to include the value in a schedule.

DMET_Panel_FedFrom2: The upstream device connected to the second feeder of the distribution equipment.

DMET_Panel_FedFromCircuit: The circuit on the upstream device to which the distribution equipment is connected.

DMET_Panel_FedFromCircuit2: The circuit on the upstream device to which the second feeder of distribution equipment is connected.

DMET_Panel_LineToLineVoltage: The line-to-line voltage of the distribution equipment.

DMET_Panel_LineToNeutralVoltage: The line-to-neutral voltage of the distribution equipment.

DMET_Panel_MainDisconnect: The main disconnect type, trip, and frame size, together in a single shared parameter. The numbers listed below are example values.

•	MLO: The main disconnect is main lugs only.

•	MCB 100A: The main disconnect is a main circuit breaker with the same size frame and trip.

•	MCB 60AT, 100AF: The main disconnect is a main circuit breaker with different frame and trip sizes. The trip size is labeled AT (for "amps trip") and the frame size is labeled AF (for "amps frame").

•	FS 100A: The main disconnect is a fused switch with the same size frame and trip.

•	FS 60AT, 100AF: The main disconnect is a fused switch with different frame and trip sizes. The trip size is labeled AT (for "amps trip") and the frame size is labeled AF (for "amps frame").

•	MLO: The main disconnect is main lugs only.

•	MCB: The main disconnect is a main circuit breaker.

•	FS: The main disconnect is a fused switch.

DMET_PanelTree_Label: The name of the distribution equipment, indented based upon its position in the model. The indent begins with a period because Revit removes any leading spaces in the value.

DMET_PanelTree_SortOrder: A number representing the position of the distribution equipment in the panel tree. When the schedule is sorted by this parameter, the DMET_PanelTree_Label will display the panel tree.

DMET_Panel_UpstreamDescription: The description for the distribution equipment as it appears in the circuit description of the upstream panel schedule.

DMET_Panel_UpstreamDescription2: The description for the second feeder of the distribution equipment as it appears in the circuit description of the upstream panel schedule.