Arc-Flash Stickers

Allows you to create a sticker for each one-line device that has Calculate Arc-Flash checked using the Edit Panels command.

If the incident energy at the device is less than 40 J/cm2, a warning label will be printed. If the incident energy is greater than 40 J/cm 2, a danger label will be printed.

The sticker will also display the shock protection information for the device. Shock protection is a function of the voltage of the device. Shock protection values are based upon NFPA 70E-2012, Table 130.4(C)(a).

Opens the following dialog box:

Print Arc-Flash Stickers

print-arc-flash-stickers

One-Line Devices: As a list of all one-line devices inserted on the drawing.

Print Stickers for All Electrical Equipment: Press this button to print stickers for all of the electrical equipment in the project.

Print Stickers for Selected Electrical Equipment: Press this button to print stickers for the selected electrical equipment.


Page url: http://www.designmaster.biz/docs/elecrt/index.html?arc_flash_stickers.htm
©2013-2017 Design Master Software, Inc