Distribution equipment: Transformer
|Up Previous Next|
These values are displayed when the Device Type is set to Distribution equipment: Transformer.
Family Edit: Distribution equipment: Transformer
The settings for the family. The values set in this top grid are used unless they are overridden by settings in the bottom Type Settings grid.
Device Type: The type of electrical device. Each type has different values that can be set. Displayed here are the settings for Distribution equipment: Transformer.
Upstream Description Prefix: A prefix added to the start of the circuit description in the upstream equipment. The default description is the name of the family instance. This value allows you to add text that will appear before the name of the family instance.
Upstream Description Suffix: A suffix added to the start of the circuit description in the upstream equipment. The default description is the name of the family instance. This value allows you to add text that will appear after the name of the family instance.
Neutral: Sets the size of the neutral wire in the feeder.
Ground: Sets the size of the ground wire in the feeder.
IG Conductor: Whether the feeder includes an isolated ground.
Transformer kVA: The size of the transformer in kVA.
Transformer K-Factor Rating: The specific K-factor rating of the transformer for handling the harmonic content of the load.
Transformer Impedance %: The impedance of the transformer for fault calculations and voltage drop calculations.
Transformer X/R Ratio: The X/R ratio of the transformer for fault calculations.
The settings for specific types in the family. Values set here override the values set in the top Family Settings grid.
Override Family Values: Whether or not to override the settings in the Family Settings grid for this family type.
©2013-2017 Design Master Software, Inc