Fault Shared Parameters

The shared parameters added to distribution equipment related to fault calculations.

Numeric Parameters

Parameter types in this section are set to number unless otherwise noted.

DMEN_Fault_FaultAtDevice: The available fault current at the distribution equipment as a current parameter. Includes both the utility fault and motor contributions.

DMEN_Fault_FaultMotorDirectlyConnected: The fault due to motors directly connected to the distribution equipment as a current parameter.

DMEN_Fault_FaultMotorTotal: The total fault due to all motors in the system as a current parameter.

DMEN_Fault_FaultUtility: The fault at the distribution equipment from the utility as a current parameter.

DMEN_Fault_FedFromFault: The available fault current at the upstream distribution equipment as a current parameter.

DMEN_Fault_FedFromFault1: The available fault current at the upstream distribution equipment connected to feeder 1 as a current parameter.

DMEN_Fault_FedFromFault2: The available fault current at the upstream distribution equipment connected to feeder 2 as a current parameter.

DMEN_Fault_Transformer_FaultAtPrimary: The available fault at the primary of a transformer as a current parameter. Set to 0 if the distribution equipment is not a transformer.

DMEN_Fault_Transformer_VA: The VA of the transformer as an apparent power parameter. Set to 0 if the distribution equipment is not a transformer.

DMEN_Fault_Transformer_XRRatio: The XR ratio of the transformer. Set to 0 if the distribution equipment is not a transformer.

DMEN_Fault_Transformer_ZPercent: The transformer impedance percentage. Set to 0 if the distribution equipment is not a transformer.

Text Parameters

Parameter types in this section are set to text.

DMET_Fault_Display: A Yes or No value that indicates whether the distribution equipment should be displayed in the fault current schedule. The default fault current schedule includes this parameter as a hidden column. Any  distribution equipmentwith the value set to No are not included in the schedule. Electrical equipment with their Part Type set to Equipment Switch are automatically set to No so they are not displayed in the schedule.

DMET_Fault_FaultAtDevice: The available fault current at the distribution equipment. A warning is displayed if the fault exceeds the AIC rating of the distribution equipment. Includes both the utility fault and motor contributions.

DMET_Fault_FaultAtDevice_NoWarnings: The available fault current at the distribution equipment. No warning is displayed based upon the AIC rating of the distribution equipment. Includes both the utility fault and motor contributions.

DMET_Fault_FaultMotorDirectlyConnected: The fault due to motors directly connected to the distribution equipment.

DMET_Fault_FaultMotorTotal: The total fault due to all motors in the system.

DMET_Fault_FaultUtility: The fault at the distribution equipment from the utility.

DMET_Fault_FedFromFault: The available fault current at the upstream distribution equipment.

DMET_Fault_Transformer_FaultAtPrimary: The available fault at the primary of a transformer. Blank if the distribution equipment is not a transformer.

DMET_Fault_Transformer_kVA: The kVA of the transformer. Blank if the distribution equipment is not a transformer.

DMET_Fault_Transformer_XRRatio: The XR ratio of the transformer. Blank if the distribution equipment is not a transformer.

DMET_Fault_Transformer_Z: The transformer impedance percentage. Blank if the distribution equipment is not a transformer.


Page url: http://www.designmaster.biz/docs/elecrt/index.html?fault_shared_parameters.htm
©2013-2017 Design Master Software, Inc