Circuit Shared Parameters

The shared parameters added to circuits.

Numeric Parameters

Parameter types in this section are set to number unless otherwise noted.

DMEN_Circuit_ConductorWireArea: The area of the conductor wire as an area parameter. The area is for a single conductor wire. It does not account for parallel runs or the number of poles.

DMEN_Circuit_ConduitArea: The area of the conduit as an area parameter.

DMEN_Circuit_FaultAtDevice: The available fault current at the electrical equipment connected to the circuit as a current parameter. Includes both the utility fault and motor contributions.

DMEN_Circuit_FaultMotorDirectlyConnected: The fault due to motors directly connected to the electrical equipment connected to the circuit as a current parameter.

DMEN_Circuit_FaultMotorTotal: The total fault due to all motors in the system at the electrical equipment connected to the circuit as a current parameter.

DMEN_Circuit_FaultUtility: The fault at the electrical equipment connected to the circuit from the utility as a current parameter.

DMEN_Circuit_GroundWireArea: The area of the ground wire as an area parameter.

DMEN_Circuit_Length: The length of the circuit as a length parameter.

DMEN_Circuit_NeutralWireArea: The area of the neutral wire as an area parameter.

DMEN_Circuit_ParallelRuns: The number of parallel runs.

DMEN_Circuit_Poles: The number of poles.

DMEN_Circuit_VoltageDrop: The voltage drop of the circuit.

Text Parameters

Parameter types in this section are set to text.

DMET_Circuit_ConductorWireSize: The number of parallel runs and the size of the conductor wires.

DMET_Circuit_ConductorWireSizeOnly: The size of the conductor wires.

DMET_Circuit_ConduitSize: The size of the conduit.

DMET_Circuit_FaultAtDevice: The available fault current at the electrical equipment connected to the circuit. A warning is displayed if the fault exceeds the AIC rating of the electrical equipment. Includes both the utility fault and motor contributions.

DMET_Circuit_FaultAtDevice_NoWarnings: The available fault current at the electrical equipment connected to the circuit. No warning is displayed based upon the AIC rating of the electrical equipment. Includes both the utility fault and motor contributions.

DMET_Circuit_FaultMotorDirectlyConnected: The fault due to motors directly connected to the electrical equipment connected to the circuit.

DMET_Circuit_FaultMotorTotal: The total fault due to all motors in the system at the electrical equipment connected to the circuit.

DMET_Circuit_FaultUtility: The fault at the electrical equipment connected to the circuit from the utility.

DMET_Circuit_FeederID: The feeder ID used for the circuit on the one-line diagram.

DMET_Circuit_GroundWireSize: The size of the ground wire.

DMET_Circuit_Length_ft: The length of the circuit in feet.

DMET_Circuit_Length_m: The length of the circuit in meters.

DMET_Circuit_NeutralWireSize: The size of the neutral wire.

DMET_Circuit_Number: The circuit number.

DMET_Circuit_ParallelRuns: The number of parallel runs.

DMET_Circuit_VoltageDrop: The voltage drop of the circuit.

DMET_Circuit_WireCallout: The wire callout for the circuit using the calculated or specified wire size settings.


Page url: http://www.designmaster.biz/docs/elecrt/index.html?circuit_parameters.htm
©2013-2017 Design Master Software, Inc