Insert Diffuser Schedule

A diffuser schedule that lists all the diffusers used in the current project can be inserted on the drawing.

To insert this schedule into the drawing, go to

DM HVAC->Diffusers->Insert Diffuser Schedule

Diffuser Project Schedule Dialog Box

Diffusers--Insert Diffuser Project Schedule dialog box

Schedule Notes: A note that will appear below the schedule when inserted on the drawing.

Maximum Schedule Height: Whether or not the schedule has a maximum height. This height is inches on the printed page.

If this is not checked, the schedule will be in a single schedule.

If this is checked, you can specify the maximum height of the schedule. When the schedule exceeds this height, it will be continued in a second schedule next to the first. The label of the second schedule will have the Schedule Title Continued Label option added to it to indicate that it is a continuation of the first schedule. See the Options->Miscellaneous section for more information.

Specify on Drawing: Press this button to specify the Maximum Schedule Height on the drawing. The dialog box will be closed and you will be prompted to specify the height.

Specify maximum schedule height:

The distance that you enter on the drawing will be used as the maximum height. It is simplest to draw a line straight down to where the bottom of the schedule should be located.

Show Unused Diffusers: Whether or not diffuser in the schedule that have not been inserted on a drawing will be displayed in the schedule.

Edit Title, Column Labels, and Column Order: Press this button to modify the layout of the diffuser schedule on the drawing. See the Labels and Schedules->Edit Diffuser Schedule List section for more information.

Inserting or Updating the Schedule On the Drawing

To insert or update the schedule, press OK.

Inserting the Schedule the First Time

If the diffuser schedule is not currently inserted on the drawing, you will be prompted for the schedule insertion location.

Specify insertion point for diffuser schedule:

The location you specify will be used as the top-left corner for the diffuser schedule.

Updating the Schedule Already on the Drawing

If the diffuser schedule is already inserted on the drawing, it will be updated in its current location.

As the diffuser schedule will not update automatically, the schedule on the drawing must be updated when you make changes are made to the drawing or to the project schedule.

If you have manually inserted graphics, such as revision clouds, over the schedule graphic, always be certain to check their location after updating the schedule.


Page url: http://www.designmaster.biz/docs/hvac/index.html?insert_diffuser_schedule.htm
©2012-2013 Design Master Software, Inc