Insert Multiple Point Thermostat Control Wire

The Insert Multiple Point Thermostat Control Wire command is used to insert a thermostat control wire on the drawing using multiple points to define a polyline. The thermostat control wires are not linked to the database. The thermostat control wire is inserted as a standard AutoCAD polyline and can be modified using standard AutoCAD commands once it is inserted.

To insert a mutliple point thermostat control wire, go to

DM HVAC->Drafting Tools->Insert Multiple Point Thermostat Control Wire

You will be prompted to specify the starting point of the thermostat control wire.

Start point:

You will be prompted to specify the second point of the thermostat control wire.

To point:

You will continue to be prompted to specify points for the thermostat control wire. After you specify the final point, press ENTER. A multiple point polyline will be inserted on the drawing.


Page url: http://www.designmaster.biz/docs/hvac/index.html?insert_multiple_point_thermostat_control_wire.htm
©2012-2013 Design Master Software, Inc