Insert Top and Bottom Elevation Label

The Insert Top and Bottom Elevation Label command is used to insert an elevation label on a duct that displays the elevation of the top and the bottom of the duct.

To insert a top and bottom elevation label on a duct, go to

Ribbon: DM HVAC->3D-BIM-> dm_hvac-insertTopAndBottomElevationLabel Insert Top and Bottom Elevation Label

Pulldown Menu: DM HVAC->3D-BIM->Insert Top and Bottom Elevation Label

You will be prompted to identify which section of duct is to be labeled.

Select duct to insert label on:

Specify the location of the top and bottom elevation label on the drawing. See the Inserting Notes and Leaders on the Drawing section for more information about inserting the label.

Related Options

Leader graphic: Sets the block used for elevation label leaders.

Leader location: Sets whether leaders snap to the edge or center of ducts.

Both block: Sets the block used for the top and bottom elevation label.

Top label: Sets how the top elevation is displayed on the label.

Bottom label: Sets how the bottom elevation is displayed on the label.

Include exterior insulation thickness in elevation: Sets whether the top and bottom elevations account for exterior insulation.


Page url: http://www.designmaster.biz/docs/hvac/index.html?insert_top_bottom_elevation_label.htm
©2012-2018 Design Master Software, Inc