|Up Previous Next|
This section describes the table that is printed when the Ventilation Calculation Method field in the command is set to Minimum.
The Ventilation Schedule table lists each room and zone in the project and the ventilation requirements for the space.
Location: All the zones and rooms in the project. Rooms and zones that are part of a zone are indented and listed below the parent zone.
Room Type: Only used for rooms. Set using the Room Type field in the command.
For zones, the cell is blank.
Ventilation Requirements: Set using the Cooling 1, Cooling 2, Heating 1 and Heating 2 fields in in the Ventilation section of the or command.
Area: The area of the room. Set based upon the room boundary inserted on the drawing.
People: The total number of people in the room or zone. This value is rounded based upon the Allow Fractional People checkbox in the command.
For rooms, set using the SF / Person or People fields in the People section of the command or the SF / Person or People fields in the People section of the command
For zones, the number of people is the sum of the people in the rooms in the zone. If People Diversity box is checked in the command, then the number of people is based upon the SF / Person or People in that command.
Ventilation CFM: The ventilation airflow for the room or zone.
For rooms, set using the Cooling 1 and Cooling 2 fields in in the Ventilation section of the or command.
For zones, the ventilation airflow is the sum of the airflows of the rooms in the zone.
Supply CFM: The supply airflow required to condition the room or zone. This value is the same as the Required Supply CFM column in the Supply Air Requirements table. See the section for more information.
Ventilation %: The percentage of supply air that is outside air. Equal to the Ventilation CFM column divided by the Supply CFM column.
©2012-2013 Design Master Software, Inc