If you want to add a point from the room outline, go to
DM Electrical
Building DefinitionInsert Wall Point
Design Master will prompt you to provide the "First fence point crossing wall". This may be any point either inside or outside the wall. Design Master will then prompt you to provide the "Second fence point". This is any point on the opposite side of the wall that crosses the wall at the exact point where you wish to insert a new wall point. Once you have provided both points, there will be a new point on the room outline. Once a new point is inserted on a wall it may be moved using the method described below.
Moving a Point on a Wall
To move a point on a wall, select the room. Blue grips will appear at each corner and break in the room outline. Click on the corner you want to move, and drag it into the new location. You may wish to use AutoCAD Snaps to assist the moving process and increase room accuracy.
If you wish to move the information box regarding the room, select the box or room who's box you wish to move. Use the grip at the top left corner of the box to move it. You may use the grip nearest the box to move the placement of the leader arrow.