To edit lighting group labels, go to
DM Electrical
CustomizationLabels Project List Edit Lighting Group Label Project List
The Lighting Group Label Display and Order dialog box will appear.
To change the label as it will appear on the drawing, double-click on the value you wish to change under the Label column. Type the label as you wish it to appear.
To change the width, double-click on any cell under the Width column. Type in the number of inches on the plotted drawing for the desired width of the lighting group label information box. The program will assign this width to all the rows in the width column, as all values are displayed in the same information box. If no number is entered, the default is to have each box the minimum width necessary for the information displayed.
To indicate whether you wish a specific value to be included in the lighting group label, check or un-check the check boxes under the Display column.
To change the order in which the various labels are displayed, use the Move Up or Move Down buttons. The order in which the labels are listed in the Lighting Group Label Display and Order dialog box is the same order they will be displayed on the drawing.
If you change the lighting group label project list after lighting group labels have already been placed on the drawing, you will need to run the Update Lighting Group Labels command in order to have the changes reflected on the drawing.