Modifying Switches and Labels

To move, copy, rotate, mirror, array, or erase a switch, use standard AutoCAD commands. To change the system layer of a switch, use the Change Device System Layer command or the Query Device command.

To move, rotate, or erase a switch label (not the entire switch graphic), use the general Design Master commands that are applicable to labels. Move Device Label, Rotate Device Label, and Erase Part of Device.)  

Switch labels include the switch group label and the circuit label. Both labels can be manipulated by the commands discussed above.

Remember that erasing a label in Design Master (in this case, a switch label) does not remove the switch from that switch group or circuit.