Editing and Re-inserting a Receptacle Schedule

Top  Previous  Next

To edit the appearance of a receptacle schedule either before or after it has been placed on the drawing, go to

DM Electrical arrow Receptacles arrow Insert Receptacle Project Schedule

The Insert Receptacle Project Schedule dialog box will open as shown below.

insert_recept_project_sched

Press Edit Column Labels and Order. The Receptacle Schedule Label Display and Order dialog will appear. Uncheck the box in the Display column for the NEMA row as shown below. The empty NEMA column previously displayed in the receptacle schedule will not be included. Double click on the Callout row in the Label column and type "REC TYPE" as shown below. The column previously labeled Callout in the receptacle schedule will be labeled Rec Type.

recept_sched_label_display_orderchanged

When you have finished editing the label display and order columns and rows, press OK. You will be returned to the Insert Receptacle Project Schedule dialog box. Press OK. Design Master Electrical will take you to the drawing and ask you to specify an insertion point for the receptacle schedule. Press ENTER to place the new receptacle schedule in the exact same location as the previous location. Design Master Electrical will automatically erase the old receptacle schedule and replace it with the new one. Your drawing should now match the one shown below.

dwg_inserted_recept_schedchanged

Congratulations! You now know how to perform the basic functions regarding receptacles using Design Master Electrical.

See Equipment for the next tutorial.


Page url: http://www.designmaster.biz/support/electrical/tutorials/index.html?editing_and_re_inserting_a_rec.htm