Modifying Graphics

This section teaches you how to modify distribution equipment and feeder graphics on the one-line diagram.

Start in the ONE-LINE DIAGRAM drafting view.

Modify Distribution Equipment Graphics

1.Run the Add/Modify Graphic command.

DM One-Line-> dmert-purple-g-16 Add/Modify Graphic

2.Select panel P. The Modify Graphic dialog box will open.
3.Set One-Line Diagram Graphic to Panel with Bus, Fed from Top.
4.Set One-Line Diagram Type to Dashed.
5.Press the OK button to close the dialog box.

The graphic for panel P will be updated.

6.Select Update labels to use the default tags and tag locations for the graphic.
7.Select the P label.
8.Using the Properties panel, set the tag to DME-TAG-Panel-Name_Bus Size_Disconnect-C.
9.Use the grip provided to move the label.

modify-panel-p

Modify Feeder Graphics

1.Run the Add/Modify Graphic command.

DM One-Line-> dmert-purple-g-16 Add/Modify Graphic

2.On the feeder between panel MDP and panel P, select a point between the OCP graphic and feeder ID graphic.
3.Select Add an additional graphic. The Select Feeder Graphic dialog box will open.
4.Set Group to Meter.
5.Press the OK button to close the dialog box. A meter graphic will be added to the feeder at the point you specified.
6.Run the Graphic Move command.

DM One-Line-> dmert-light-blue-m-16 Graphic Move

7.Select the meter graphic, then the OCP graphic. The graphics will change places along the feeder.
8.Run the Add/Modify Graphic command.

DM One-Line-> dmert-purple-g-16 Add/Modify Graphic

9.On the feeder between panel MDP and panel E, select the OCP graphic.
10.Select Replace existing OCP graphic. The Select OCP Graphic dialog box will open.
11.Set Group to Switch.
12.Press the OK button to close the dialog box.

The OCP graphic on the feeder will be updated.

modify-feeders


Page url: http://www.designmaster.biz/support/electricalrt/tutorials/2.0/index.html?modifying_graphics.htm
©2018-2021 Design Master Software, Inc