Array Device (2 Point)

The Array Device (2 Point) command is used to array devices on the drawing in a straight line from the first device to a second point.

Use this command instead of the standard CAD ARRAY command.

To array devices using the 2-point method, go to

Ribbon: DM Electrical->Devices-> dm_dm-array2pt Array Device (2 Point)

Pulldown Menu: DM Electrical->Modify Devices->Array Device (2 Point)

You will be prompted to select the devices to array.

Select devices to array:

You will then be prompted to specify a second point for the array. The distance between the specified point and the first device will be divided evenly among the devices in the array.

End point of array:

You will then be prompted to specify the number of devices in the array, including the selected device.

Number of devices in array (including selected device):

The devices in the array will be generated in the space between the selected device and the end point.


Page url: http://www.designmaster.biz/docs/elec/index.html?array_device_2_point.htm
©2012-2023 Design Master Software, Inc