Create One-Line Diagram Block from One-Line Diagram
|Up Previous Next|
The Create One-Line Diagram Block from One-Line Diagram command is used to configure entities on a one-line diagram to work as a custom block on other one-line diagrams. This command can be used to create blocks that will be inserted with labels.
You can manually create a slide for the block using the Create Slide command. See the Create Slide section for more information.
To configure a one-line diagram block, go to
Ribbon: DME: Customization->Block Creation->Create One-Line Diagram Block from One-Line Diagram
Pulldown Menu: DM Electrical->Customization->Block Creation->Create One-Line Diagram Block from One-Line Diagram
Create One-Line Diagram Block
Block Drawing File Name: The name of the drawing file for the block.
Folder: The folder where the block will be saved. The default location is your customization folder.
Set Folder: Press this button to change the folder where the block will be saved.
Move entities to layer 0: Whether the entities you select for the block are moved to layer 0 or left on the layer they are currently on. If you are not sure what this means, leave this box checked.
See the help for your CAD program for more information about setting layers in blocks.
Block Type: The type of device that the one-line diagram block is used to represent.
Create record in project database: Whether the block is added to the project database.
Create record in master database: Whether the block is added to the master database.
Display Name: The name of the block on the drawing and in the selected databases.
Enter the information needed to create the one-line diagram block and press the OK button.
You will be prompted to specify a distribution equipment or feeder block.
Select distribution equipment or feeder to create block from:
You must specify a block that corresponds to the selected Block Type.
You will then be prompted to select any other entities you want to add to the block.
Select other entities to add to block:
If you selected Feeder or Meter for the Block Type, you will then be prompted to specify a label to include in the block.
Select label to include in block:
The block will be created for you.
©2012-2023 Design Master Software, Inc