Draw Additional Homerun

To draw an additional homerun, go to

Ribbon: DM Electrical->Circuiting and Homeruns-> dm_elec-drawextrahr Draw Additional Homerun

Pulldown Menu: DM Electrical->Circuiting and Homeruns->Draw Additional Homerun

You will be prompted to select the device from which to draw the homerun.

Select device from which to draw homerun:

You will then be prompted to position the homerun on the drawing

Right click or press space to change HR arc direction.

Right-click or press SPACE to flip the arc direction of the homerun.

Related Options

Homerun wire callouts and tick marks: Sets when wire callouts and/or tick marks are displayed on homeruns.

Multiple arrowheads on combined homeruns: Sets whether combined homeruns display an arrowhead for each circuit.

Homerun arrow block: Sets the block used for homerun arrowheads

This option can be further customized with the Homerun arrow length option.

Tick Mark Blocks options: Set the blocks used for tick marks and the space between tick marks.


Page url: http://www.designmaster.biz/docs/elec/index.html?draw_additional_homerun.htm
©2012-2023 Design Master Software, Inc