Edit Recurring Panel Template List

To edit recurring panel template list project settings, go to

Ribbon: DME: Customization->Project Customization-> Recurring Panel Template List Label Group

Pulldown Menu: DM Electrical->Customization->Labels and Schedules->Project List->Edit Recurring Panel Template List

To edit recurring panel template list master settings, go to

Ribbon: DME: Customization->Master & Standards Customization-> Edit Distribution Equipment Master Groups

Pulldown Menu: DM Electrical->Customization->Labels and Schedules->Standards and Master Lists->Edit Distribution Equipment Master Groups

Recurring Panel Template List Label Display and Order Dialog Box

See the Common Label and Schedule Information section for more information about using the Move Up and Move Down buttons and the Key, Label, Width, Display, and Schedule Title fields.

Values in the Key column are listed alphabetically below.

AIC: This value is taken from the recurring panel template definition.

Bus Amps: This value is taken from the recurring panel template definition.

Callout: The name of the recurring panel template.

Fault: The total fault in amps at the recurring panel template, including the fault from the utility and the fault from any motors in the system.

Feeder Size: This value is taken from the recurring panel template definition.

IG Bus: This value is taken from the recurring panel template definition.

Instance, Line: Lists the recurring panel instances based upon the template. Instances will be listed on one line, separated by commas.

Instance, List: Lists the recurring panel instances based upon the template. Each instance will be listed on a separate line.

List Note 1: This value is taken from the recurring panel template definition.

List Note 2: This value is taken from the recurring panel template definition.

List Note 3: This value is taken from the recurring panel template definition.

Location: This value is taken from the recurring panel template definition.

Lugs: This value is taken from the recurring panel template definition.

Main Disconnect Amps: This value is taken from the recurring panel template definition.

Main Disconnect Type: This value is taken from the recurring panel template definition.

Manufacturer: This value is taken from the recurring panel template definition.

Model: This value is taken from the recurring panel template definition.

Mounting: This value is taken from the recurring panel template definition.

NEMA: This value is taken from the recurring panel template definition.

Note 1: This value is taken from the recurring panel template definition.

Note 2: This value is taken from the recurring panel template definition.

Panel Neutral: This value is taken from the recurring panel template definition.

Poles: This value is taken from the recurring panel template definition.

Short Voltage: The voltage value and poles of the recurring panel template.

Examples: 120V 1P, 208V 2P

Total Calculated Amps: The total calculated load in amps of the recurring panel template.

Total Calculated KVA: The total calculated load in kVA of the recurring panel template.

Total Connected Amps: The total connected load in amps of the recurring panel template.

Total Connected KVA: The total connected load in kVA of the recurring panel template.

Upstream Breaker and Poles: The size of the breaker and number of poles for the recurring panel template feeder.

Examples: 20/1, 30/3

Upstream Circuit: The circuit to which the recurring panel template is connected on the upstream device.

Upstream Device: The upstream device to which the recurring panel template is connected.

Upstream OCP: This value is taken from the recurring panel template definition.

Utility Fault: The utility fault in amps at the recurring panel template. Use this column instead of the Fault column if you do not want to include motor contributions.

Volts: The full voltage value of the recurring panel template. The volts, poles, and wires will be displayed.

Examples: 120V 1P 2W, 208V 2P 2W

Volts Only: The voltage value of the recurring panel template. Only the volts will be displayed. The poles and wires will not be displayed.

Examples: 120V, 208V