Edit Transformer List

To edit transformer list project settings, go to

Ribbon: DME: Customization->Project Customization-> Transformer List Label Group

Pulldown Menu: DM Electrical->Customization->Labels and Schedules->Project List->Edit Transformer List

To edit transformer list master settings, go to

Ribbon: DME: Customization->Master & Standards Customization-> Edit Distribution Equipment Master Groups

Pulldown Menu: DM Electrical->Customization->Labels and Schedules->Standards and Master Lists->Edit Distribution Equipment Master Groups

Transformer List Label Display and Order Dialog Box

See the Common Label and Schedule Information section for more information about using the Move Up and Move Down buttons and the Key, Label, Width, Display, and Schedule Title fields.

Values in the Key column are listed alphabetically below.

AIC: This value is taken from the transformer definition.

Callout: The name of the transformer.

Fault: The total fault in amps at the transformer, including the fault from the utility and the fault from any motors in the system.

Feeder Size: This value is taken from the transformer definition.

Impedance: The impedance of the transformer.

KRated: This value is taken from the transformer definition.

List Note 1: This value is taken from the transformer definition.

List Note 2: This value is taken from the transformer definition.

List Note 3: This value is taken from the transformer definition.

Location: This value is taken from the transformer definition.

Manufacturer: This value is taken from the transformer definition.

Model: This value is taken from the transformer definition.

NEMA: This value is taken from the transformer definition.

Note 1: This value is taken from the transformer definition.

Note 2: This value is taken from the transformer definition.

Number of Lugs: This value is taken from the transformer definition.

Primary Short Voltage: The primary voltage value and poles of the transformer.

Examples: 208Y/120V 1P, 208V 2P

Primary Volts: The full primary voltage value of the transformer. The volts, poles, and wires will be displayed.

Examples: 208Y/120V 1P 2W, 208V 2P 2W

Primary Volts Only: The primary voltage value of the transformer. Only the volts will be displayed. The poles and wires will not be displayed.

Examples: 208Y/120V, 208V

Secondary Short Voltage: The secondary voltage value and poles of the transformer.

Examples: 208Y/120V 1P, 208V 2P

Secondary Volts: The full secondary voltage value of the transformer. The volts, poles, and wires will be displayed.

Examples: 208Y/120V 1P 2W, 208V 2P 2W

Secondary Volts Only: The secondary voltage value of the transformer. Only the volts will be displayed. The poles and wires will not be displayed.

Examples: 208Y/120V, 208V

Total Calculated Amps: The total calculated load in amps of the transformer.

Total Calculated KVA: The total calculated load in kVA of the transformer.

Total Connected Amps: The total connected load in amps of the transformer.

Total Connected KVA: The total connected load in kVA of the transformer.

Upstream Breaker and Poles: The size of the breaker and number of poles for the transformer feeder.

Examples: 20/1, 30/3

Upstream Circuit: The circuit to which the transformer is connected on the upstream device.

Upstream Device: The upstream device to which the transformer is connected.

Upstream OCP: This value is taken from the transformer definition.

Utility Fault: The utility fault in amps at the transformer. Use this column instead of the Fault column if you do not want to include motor contributions.

XFMR KVA: This value is taken from the transformer definition.