|Up Previous Next|
The Generate One-Line command creates a one-line diagram for distribution equipment and any downstream distribution equipment and equipment connections in a vertical, one-line configuration.
To generate a one-line diagram, go to
Ribbon: DM Electrical->One-Line Diagram-> Generate One-Line
Pulldown Menu: DM Electrical->One-Line Diagram->Generate One-Line
Generate One-Line Dialog Box
Select from Drawing
Press the Select from Drawing button to generate a one-line from an existing distribution equipment on the drawing.
You will be prompted to select a distribution equipment on the drawing.
Select distribution equipment to start at:
Any downstream distribution equipment and devices connected to the equipment will be generated. Feeders will be inserted between anything that is connected.
Select from Tree / List
All distribution equipment in the current project is listed in a tree corresponding to how the equipment are connected to each other, and alphabetically by callout.
Press the Edit button to open the corresponding dialog box for the selected equipment.
Press the OK button to insert the selected equipment on the drawing.
You will be prompted for the insertion point.
Select insertion point:
The selected distribution equipment and any downstream equipment and devices will be generated. Feeders will be inserted between anything that is connected.
©2012-2023 Design Master Software, Inc