Insert Equipment on this Drawing

The Insert Equipment on this Drawing command is used to insert equipment on the drawing that currently exists in the database. Equipment that exists in the database can be created using the Create Equipment command, the Remove Equipment from this Drawing command, and the Import Equipment from Another Project command.

To insert a piece of equipment on the drawing that exists in the database, go to

Ribbon: DM Electrical->Devices-> Insert Equipment on this Drawing

Pulldown Menu: DM Electrical->Equipment->Insert Equipment on this Drawing

Select Equipment to Insert on the Drawing Dialog Box

Group: A list of the equipment groups in the project. The equipment listed in the Equipment list are all part of the selected group. See the Equipment Project Groups section for more information.

A list of pieces of equipment in the group that are not are the drawing will be displayed. Equipment that is already inserted on the drawing will not be displayed, as it cannot be inserted again using this command.

Select the equipment to insert and press the OK button.

You will be prompted to insert the piece of equipment on the drawing.

Specify insertion point:

You will then be prompted for the rotation angle. If the equipment block is not able to be rotated, this prompt will be skipped.

Rotation angle <0>:

If the equipment has a disconnect block, you will then be prompted to insert the disconnect on the drawing.

Specify insertion point:
Rotation angle <0>:

You will then be prompted for the location of the equipment callout.

Right-click or press space to toggle the leader on or off, press enter to place the callout.

See the Inserting Notes and Leaders on the Drawing section for more information about inserting the callout.