Insert Meter

The Insert Meter command is used to insert a meter on the one-line diagram. Meters are for informational purposes only and are not otherwise used.

To insert a meter on a drawing, go to

Ribbon: DM Electrical->One-Line Diagram-> dm_elec-oneLine-insertMeter Insert Meter

Pulldown Menu: DM Electrical->One-Line Diagram->Insert Meter

Insert Meter Dialog Box


Select Block to Insert: The block to be used on the drawing for the meter.

Layer System: See the Layer System section for more information.

Press the OK button. You will be prompted to select a feeder or bus onto which the meter will be inserted.

Select feeder or bus to insert meter on:

After you select the feeder or bus, the meter will be inserted on the drawing.

Page url:
©2012-2023 Design Master Software, Inc