This section describes the options available in the Equipment group in the Design Master Electrical Options dialog box.

Equipment callout: This option controls the information that is displayed on the callout for each piece of equipment. See the How to Use or Create a Custom Equipment Callout article in the knowledge base for more information.
• | Display callout, kVA and HP: The equipment callout contains two lines. The top line displays the callout. The bottom line displays the loads on the equipment and the voltage. Motor loads with a horsepower value set are displayed in horsepower. All other loads are displayed in kVA. |
• | Display callout, amps, and HP: The equipment callout contains two lines. The top line displays the callout. The bottom line displays the loads on the equipment and the voltage. Motor loads with a horsepower value set are displayed in horsepower. All other loads are displayed in amps. |
• | Display callout and amps only: The equipment callout contains two lines. The top line displays the callout. The bottom line displays the loads on the equipment and the voltage. All loads are displayed in amps. |
• | Display callout only: The equipment callout contains a single line that displays the callout. |
• | No callout: No equipment callout is inserted on the drawing. |
• | Select custom block: Select this option to choose a custom block for your equipment callout. Once the block is selected, the block name will be displayed. |
|