This section describes the options available in the Building Project Information group in the Design Master HVAC Options dialog box.
All of the options in this section can be set for a project using the Project Information dialog box. These options are provided so that you can specify the values in the standards database. The values in the standards database will be used as the default values on new projects. See the Project Info section for more information.
Heating safety factor (room): This value is the same as the Heating Safety Factor--Room field.
Heating safety factor (ventilation): This value is the same as the Heating Safety Factor--Ventilation field.
Cooling safety factor (room): This value is the same as the Cooling Safety Factor--Room field.
Cooling safety factor (ventilation): This value is the same as the Heating Safety Factor--Ventilation field.
Floor heat loss coefficient: This value is the same as the Floor Heat Loss Coefficient field.
Ventilation calculation method: This value is the same as the Ventilation Calculation Method field.
Use actual supplied airflow in ventilation and psychrometric calculations: This value is the same as the Use Actual Supplied Airflow in Ventilation and Psychrometric Calculations checkbox.
Set maximum room ventilation percentage: This value is the same as the Maximum Room Ventilation Percentage checkbox.
Maximum room ventilation percentage: This value is the same as the Maximum Room Ventilation Percentage field. If Set maximum room ventilation percentage is set to No, this option is disabled.
Allow fractional people: This value is the same as the Allow Fractional People checkbox.
Print system loads for rooms: This value is the same as the Print System Loads checkbox.
Calculate cooling in January: This value is the same as the January checkbox.
Calculate cooling in February: This value is the same as the February checkbox.
Calculate cooling in March: This value is the same as the March checkbox.
Calculate cooling in April: This value is the same as the April checkbox.
Calculate cooling in May: This value is the same as the May checkbox.
Calculate cooling in June: This value is the same as the June checkbox.
Calculate cooling in July: This value is the same as the July checkbox.
Calculate cooling in August: This value is the same as the August checkbox.
Calculate cooling in September: This value is the same as the September checkbox.
Calculate cooling in October: This value is the same as the October checkbox.
Calculate cooling in November: This value is the same as the November checkbox.
Calculate cooling in December: This value is the same as the December checkbox.