Print Cooling Detail

The section describes what is printed when Print Cooling Detail is checked in the Print Load Calculations dialog box.

Cooling Load Details - System

The Cooling Loads Details - System table lists each zone in the project and a breakdown of the system cooling loads by type.

The load values are based upon the listed system peak value. The system peak includes the ventilation and plenum loads.

Lighting, equipment, and people loads are not dependent upon the time of day. They are listed in the Cooling Loads Details - Room table to save space.

Each load lists two values. The first is the load in Btu/h, the second is the load as a percentage of the total system cooling load.

Location: All of the zones in the project. Zones that are part of a zone are indented and listed below the parent zone. If Print System Loads for Rooms is checked in the Print Load Calculations command, the rooms in the project will also be listed.

Peak: The month and hour when the peak system cooling load occurs.

Plenum: The plenum cooling load.

Based upon the following fields in the Query Wall command:

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Based upon the following fields in the Zone List command:

Based upon the following fields in the Floor List command:

Based upon the following fields in the Project Info command:

Roof: The roof cooling load.

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Based upon the following fields in the Zone List command:

Based upon the following fields in the Floor List command:

Based upon the following fields in the Project Info command:

Wall: The wall cooling load.

Based upon the following fields in the Query Wall command:

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Based upon the following fields in the Zone List command:

Based upon the following fields in the Project Info command:

Glass: The glass cooling load.

Based upon the following fields in the Query Wall command:

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Based upon the following fields in the Zone List command:

Based upon the following fields in the Project Info command:

Vertical Partitions: The cooling load from wall partitions.

Based upon the following fields in the Query Wall command:

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Based upon the following fields in the Zone List command:

Based upon the following fields in the Floor List command:

Based upon the following fields in the Project Info command:

Horizontal Partitions: The cooling load from floor and ceiling partitions.

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Based upon the following fields in the Zone List command:

Based upon the following fields in the Floor List command:

Based upon the following fields in the Project Info command:

Ventilation, Sensible: The sensible ventilation cooling load.

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Based upon the following fields in the Zone List command:

Based upon the following fields in the Project Info command:

Ventilation, Latent: The latent ventilation cooling load.

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Based upon the following fields in the Zone List command:

Based upon the following fields in the Project Info command:

Infiltration, Sensible: The sensible infiltration cooling load.

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Based upon the following fields in the Zone List command:

Based upon the following fields in the Project Info command:

Infiltration, Latent: The latent infiltration cooling load.

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Based upon the following fields in the Zone List command:

Based upon the following fields in the Project Info command:

Cooling Load Details - Room

The Cooling Loads Details - Room table lists each room and zone in the project and a breakdown of the room cooling loads by type.

The load values are based upon the listed room peak value. The room peak does not include the ventilation and plenum loads.

Each load lists two values. The first is the load in Btu/h, the second is the load as a percentage of the total room cooling load.

Location: All of the zones and rooms in the project. Rooms and zones that are part of a zone are indented and listed below the parent zone.

Peak: The month and hour when the peak room cooling load occurs.

If System Type is set to Constant Volume in the Zone List command, then CV - Sum of Peaks is listed. Constant volume zones do not have a peak time.

Roof: The roof cooling load. Based upon the same fields as in the Cooling Loads Details - System table described above.

Wall: The wall cooling load. Based upon the same fields as in the Cooling Loads Details - System table described above.

Glass: The glass cooling load. Based upon the same fields as in the Cooling Loads Details - System table described above.

Vertical Partitions: The cooling load from wall partitions. Based upon the same fields as in the Cooling Loads Details - System table described above.

Horizontal Partitions: The cooling load from floor and ceiling partitions. Based upon the same fields as in the Cooling Loads Details - System table described above.

Lighting: The lighting cooling load.

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Based upon the following fields in the Zone List command:

Based upon the following fields in the Floor List command:

Equipment, Sensible: The sensible equipment cooling load.

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Equipment, Latent: The latent equipment cooling load.

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

People, Sensible: The sensible people cooling load.

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Based upon the following fields in the Zone List command:

Based upon the following fields in the Project Info command:

People, Latent: The latent people cooling load.

Based upon the following fields in the Edit Rooms and Room Project Schedule commands:

Based upon the following fields in the Zone List command:

Based upon the following fields in the Project Info command:

Infiltration, Sensible: The sensible infiltration cooling load. Based upon the same fields as in the Cooling Loads Details - System table described above.

Infiltration, Latent: The latent infiltration cooling load. Based upon the same fields as in the Cooling Loads Details - System table described above.