45-90 Vertical at Pipe Connection

The 45-90 Vertical at Pipe Connection command is used to insert a connecting pipe that rises or drops from the elevation of the pipe to the elevation of the fixture. The connecting pipe then goes toward the fixture at a 45-degree angle to the pipe and turns 90 degrees to connect to the fixture.

To make a 45-90 vertical connection at the pipe, go to

Ribbon: DM Plumbing->Fixtures-> dm_plumb-fixtureConnection-single45-vertical 45-90 Vertical at Pipe Connection

Pulldown Menu: DM Plumbing->Fixtures->45-90 Vertical at Pipe Connection

You will be prompted to identify which fixture to connect to a pipe.

Select fixture to connect:

You will then be prompted to select the pipe to which the fixture will be connected.

Select pipe at connection point:

The fixture and the pipe will be connected.

Related Options

Break width: Sets the width of the break in a pipe if it is overlapped by another pipe.

Vertical pipe drafting method: Sets how vertical pipes are drawn.

This option can be further customized with the Minimum vertical pipe diameter and Not to scale vertical pipe diameter options.


Page url: http://www.designmaster.biz/docs/plumb/index.html?45_90_vertical_pipe_connection.htm
©2012-2023 Design Master Software, Inc