90-45 Vertical at Pipe Connection
|Up Previous Next|
The 90-45 Vertical at Pipe Connection command is used to insert a connecting pipe that rises or drops from the elevation of the pipe to the elevation of the fixture. The connecting pipe then goes toward the fixture at a 90-degree angle to the pipe and turns 45 degrees to connect to the fixture.
To make a 90-45 vertical connection at the pipe, go to
Ribbon: DM Plumbing->Fixtures-> 90-45 Vertical at Pipe Connection
Pulldown Menu: DM Plumbing->Fixtures->90-45 Vertical at Pipe Connection
You will be prompted to identify which fixture to connect to a pipe.
Select fixture to connect:
You will then be prompted to select the pipe to which the fixture will be connected.
Select pipe at connection point:
The fixture and the pipe will be connected.
©2012-2023 Design Master Software, Inc